TEST
Objavljeno: To avg 23, 2005 4:14 pm
a mi lahko kdo zrihta teste od avtu
in sicer za bravo hgt(oba tipa) in pa za fiat coupe 2.0 20v turbo
in sicer za bravo hgt(oba tipa) in pa za fiat coupe 2.0 20v turbo
našel sem samo podatke od obeh, če ti kaj pomagajo,pa upam da razumete ker so v angelščini.....
FIAT BRAVO HGT 20V letnik (1998)
Type: 4/5S HBK
Number of doors: 3
Dimensions
Wheelbase: 2540 mm 100.00 in
Track front: 1471 mm 57.91 in
Track rear: 1430 mm 56.29 in
Length: 4030 mm 158.66 in
Width: 1750 mm 68.89 in
Kerb weight: 1190 kg 2623.49 lb
Fuel capacity: 60 l 15.85 US gal
Engine
Manufacturer: Fiat
Type: S-5
DOHC
20 valves total
4 valves per cylinder
Bore x stroke: 82.00mm × 75.65mm
Bore / stroke ratio: 1.08
Displacement: 1998 cc 121.92 cu in
Compression: 10.70:1
Fuel system: SMPFi
Aspiration: Normal
Catalytic Converter: Y
Max. output: 154.1 PS (152.0 bhp) (113.3 kW)@65000 rpm
Max. torque: 186.0 Nm (137 lbft) (19 kgm)@3750 rpm
Coolant: Water
Specific output: 76.1 bhp/litre
Specific torque: 93.09 Nm/litre
Performance
0-100km/h: 8 s
Kilometre: 29.00s
Top speed: 213 km/h
Fuel consumption: 13.1/7.2/9.4 l/100km urban/extra-urban/combined
Power to weight: 127.73 bhp/ton
Chasis
Engine location: Front
Engine alignment: Transverse
Steering: rack & pinion PAS
Turning circle: 10.80 m
Suspension front: I.MS.LW.ARB.
Suspension rear: I.ARB.
Tyres front: 195/55 R 15 84V
Tyres rear: 195/55 R 14 84V
Brakes: VeDi/Di-S
Brake diametre: 284/240 mm
Transmission: 5M
Drive: FWD
Top gear ratio: 0.97
Final drive ratio: 3.56
FIAT COUPE 2.0 20V TURBO (letnik 1996)
Type: 2+2 FHC
Number of doors: 2
Dimensions
Wheelbase: 2540 mm 100.00 in
Track front: 1491 mm 58.70 in
Track rear: 1468 mm 57.79 in
Length: 4250 mm 167.32 in
Width: 1760 mm 69.29 in
Kerb weight: 1310 kg 2888.05 lb
Weight distribution F/R: 68 %
Fuel capacity: 63 l 16.64 US gal
Engine
Manufacturer: Fiat
Type: S-5
DOHC
20 valves total
4 valves per cylinder
Bore x stroke: 82.00mm × 75.65mm
Bore / stroke ratio: 1.08
Displacement: 1998 cc 121.92 cu in
Compression: 8.50:1
Fuel system: MPFi
Aspiration: Turbo
Intercooler: Y
Catalytic Converter: Y
Max. output: 219 PS (216.0 bhp) (161.1 kW)@5750 rpm
Max. torque: 310.0 Nm (229 lbft) (31.6 kgm)@2500 rpm
Coolant: Water
Specific output: 108.1 bhp/litre
Specific torque: 155.16 Nm/litre
Performance
0-60mph: 6 s
0-100km/h: 6.5 s
0-100mph: 14.5 s
Quarter mile: 14.60s
Kilometre: 25.90s
Top speed: 250 km/h
Power to weight: 164.89 bhp/ton
Chasis
Engine location: Front
Engine alignment: Transverse
Steering: rack & pinion PAS
Turns lock-to-lock: 2.200
Turning circle: 10.40 m
Suspension front: I.MS.LW.CS.ARB.
Suspension rear: I.TA.CS.ARB.
Tyres front: 225/45 R 16 Z
Tyres rear: 225/45 R 16 Z
Brakes: VeDi/VeDi-S
Brake diametre: 305/251 mm
Transmission: 5M
Drive: FWD
Top gear ratio: 0.91
Final drive ratio: 3.11
