Torej sem se kar malo nabrau in ugotovil da v ECE/TRANS/WP.29/GRE/2016/2 (
https://www.google.si/url?sa=t&rct=j&q= ... 24&cad=rja) piše sledeče glede rumenih luči oz. selective-yellow light
"2.4.2. An approval code shall be assigned to each type approved. Its first character (at present 2, corresponding to the 02 series of amendments which entered into force on 27 October 1983 and to the 03 series of amendments (not requiring changes in the approval number), which entered into force on 1 June 1984) shall indicate the series of amendments incorporating the most recent major technical amendments made to the Regulation at the time of issue of the approval. This will be followed by an identification code comprising not more than three characters. Only the Arabic numerals and capital letters listed in footnote shall be used. The same Contracting Party may not assign the same code to another type of filament lamp light source. Notice of approval or of extension or refusal or withdrawal of approval or production definitively discontinued of a type of filament lamp light source pursuant to this Regulation shall be communicated to the Parties of the Agreement which apply this Regulation by means of a form conforming to the model in Annex 2 to this Regulation and of a drawing, supplied by the applicant for approval in a format not exceeding A4 (210 x 297 mm) and on a scale of at least 2: 1.
If the applicant so desires, the same approval code may be assigned to the filament lamp light source emitting white light and to the filament lamp light source emitting selective-yellow light (see para. 2.1.2.3.). -> 2.1.2.3. Rated voltage;"
Torej če prav razumem ko proizvajalec dobi "ECE odobritev" za recimo žarnico H7 55W/12V ki oddaja belo svetlobo, če želi lahko uporabi isto "odobritveno kodo" za H7 55W/12V ki oddaja rumeno selektivno svetlobo. Kar bi potem pomenilo da v primeru Gloden Yellow XENCN H7 12V 55W 2300K katera ima oznako 2VG

ima tudi veljaven certifikat in je road legal.
Certifikat pod 2VG oznako je na netu in v pdf obliki (
https://www.certipedia.com/secure_area/ ... rLN5eAg_-w) iz katerega je razvidno da je bila testirana halogenka H7 55W ki oddaja belo svetlobo.
Ter še en povzetek iz ECE/TRANS/WP.29/GRE/2016/2
"Filament lamps light sources emitting selective-yellow light shall be tested in the same manner as described in paragraphs 3.9.2. and 3.9.3. in a standard headlamp as specified in paragraph 3.9.5. to ensure that the illumination complies with at least 85 per cent for 12-volt filament lamps light sources, and at least 77 per cent for 6-volt and 24-volt filament lamps light sources, with the minimum values of the light-distribution requirements laid down for the passing beam in the relevant Regulation. The maximum illumination limits remain unchanged.
In the case of a filament lamp light source having a selective-yellow bulb, this test shall be left out if the approval is also given to the same type of filament lamp light source emitting white light."
Ima kdo drugačen pogled na to situacijo?